基于组合赋权的改进集对模型在流域生态健康评价中的应用          下载免费PDF全文

孙超  陈文  李计生  李斌 《水文》2018,38(2):53-58

流域生态健康评价是流域管理、水资源开发利用、生态保护的重要决策依据,也是促进流域社会经济可持续发展的重要措施。在确定石羊河流域生态健康评价指标体系和等级标准的基础上,采用组合赋权法确定评价指标的权重,建立了改进集对模型评价方法。定量评价结果表明,石羊河流域上游、中游、下游生态健康分别为基本健康、亚健康、病态等状态。  相似文献   

地区场选样洪水计算在西部流域应用分析          下载免费PDF全文

王进  赵映东  邓居礼  吕明侠 《水文》2018,38(5):59-62

为采用地区场选样洪水计算方法分析研究建立了西部祖厉河流域设计洪水计算经验公式,设计计算成果经与皮尔逊三型频率曲线设计计算成果比较分析,计算成果精度较高。由此确定了该流域设计洪水计算相关成果图及查算表,为该流域设计洪水计算提供技术支撑。  相似文献   

渤海湾盆地济阳坳陷碎屑锆石裂变径迹年龄记录的构造抬升事件   总被引：1，自引：0，他引：1  

李理  钟大赉 《岩石学报》2018,34(2):483-494

对采自渤海湾盆地东南部济阳坳陷的碎屑岩进行测年研究,目的是通过碎屑锆石裂变径迹年龄揭示源区及其抬升剥露史和构造热事件,为华北克拉通构造演化特别是元古宙构造演化提供新的热年代学约束。14件上白垩统-上新统砂岩/粉砂岩岩心样品测年结果显示,锆石裂变径迹年龄分布在308±35Ma~145±19Ma之间,且所有单颗粒锆石径迹年龄均大于其沉积年龄,表明这些锆石为碎屑锆石。除1件样品外,其余13件样品的单颗粒年龄的,可以用来识别源区及其构造抬升。未通过χ2检验的锆石二项式最佳拟合峰值年龄集中分为9组:P1(1187Ma)、P2(720~548Ma)、P3(526Ma)、P4(330~319Ma)、P5(296~274Ma)、P6(213~201Ma)、P7(195~177Ma、162Ma)、P8(134~102Ma)和P9(94Ma),加上通过χ2检验的三叠纪(230Ma),指示源区中元古代-晚白垩世经历的9期构造抬升/岩浆活动。它们分别是发生在中元古代的芹峪运动、新元古代的构造抬升(约720~575Ma)、~548Ma的蓟县运动;古生代~526Ma早寒武世末构造运动、海西期构造抬升;晚三叠世印支期挤压构造抬升、早-中侏罗世印支期弱挤压抬升、早白垩世燕山期强烈岩浆活动及晚白垩世燕山晚期的抬升。华北克拉通北缘、克拉通内部古陆和盆地内部是渤海湾盆地上白垩统-上新统的主要物源区,古生代以来剥露速率逐渐增大,古生代、三叠纪、早-中侏罗世和白垩纪分别为0.020~0.033mm/y,0.033~0.042mm/y,0.034~0.049mm/y和0.041~0.097mm/y,反映源区白垩纪构造/岩浆活动最强烈。锆石裂变径迹年龄记录的中元古代-晚白垩世构造运动对探讨华北克拉通的构造演化特别是元古宙的演化提供了年代学证据,综合分析推断华北克拉通可能参与了Rodinia超大陆的形成与裂解。  相似文献   

Geological Controls on the CBM Productivity of No.15 Coal Seam of Carboniferous–Permian Taiyuan Formation in Southern Qinshui Basin and Prediction for CBM High-yield Potential Regions     

ZHANG Zheng  QIN Yong  ZHUANG Xinguo  LI Guoqing  LIU Donghai 《《地质学报》英文版》2018,92(6):2310-2332

Coalbed methane (CBM) resources in No.15 coal seam of Taiyuan Formation account for 55% of the total CBM resources in southern Qinshui Basin (SQB), and have a great production potential. This study aims at investigating the CBM production in No.15 coal seam and its influence factors. Based on a series of laboratory experiments and latest exploration and development data from local coal mines and CBM companies, the spatial characteristics of gas production of No.15 coal seam were analyzed and then the influences of seven factors on the gas productivity of this coal seam were discussed, including coal thickness, burial depth, gas content, ratio of critical desorption pressure to original coal reservoir pressure (RCPOP), porosity, permeability, and hydrogeological condition. The influences of hydrological condition on CBM production were analyzed based on the discussions of four aspects: hydrogeochemistry, roof lithology and its distribution, hydrodynamic field of groundwater, and recharge rate of groundwater. Finally, a three-level analytic hierarchy process (AHP) evaluation model was proposed for predicting the CBM potentials of the No.15 coal seam in the SQB. The best prospective target area for CBM production of the No.15 coal seam is predicted to be in the districts of Panzhuang, Chengzhuang and south of Hudi.  相似文献   

Development Phases and Mechanisms of Tectonic Fractures in the Longmaxi Formation Shale of the Dingshan Area in Southeast Sichuan Basin, China     

FAN Cunhui  HE Shun  ZHANG Yu  QIN Qirong  ZHONG Cheng 《《地质学报》英文版》2018,92(6):2351-2366

Shale gas has currently attracted much attention during oil and gas exploration and development. Fractures in shale have an important influence on the enrichment and preservation of shale gas. This work studied the developmental period and formation mechanism of tectonic fractures in the Longmaxi Formation shale in the Dingshan area of ??southeastern Sichuan Basin based on extensive observations of outcrops and cores, rock acoustic emission (Kaiser) experiments, homogenization temperature of fracture fill inclusions, apatite fission track, thermal burial history. The research shows that the fracture types of the Longmaxi Formation include tectonic fractures, diagenetic fractures and horizontal slip fractures. The main types are tectonic high-angle shear and horizontal slip fractures, with small openings, large spacing, low densities, and high degrees of filling. Six dominant directions of the fractures after correction by plane included NWW, nearly SN, NNW, NEE, nearly EW and NW. The analysis of field fracture stage and fracture system of the borehole suggests that the fractures in the Longmaxi Formation could be paired with two sets of plane X-shaped conjugate shear fractures, i.e., profile X-shaped conjugate shear fractures and extension fractures. The combination of qualitative geological analysis and quantitative experimental testing techniques indicates that the tectonic fractures in the Longmaxi Formation have undergone three periods of tectonic movement, namely mid-late Yanshanian movement (82–71.1 Ma), late Yanshanian and middle Himalaya movements (71.1–22.3 Ma), and the late Himalayan movement (22.3–0 Ma). The middle-late period of the Yanshanian movement and end of the Yanshanian movement-middle period of the Himalayan movement were the main fracture-forming periods. The fractures were mostly filled with minerals, such as calcite and siliceous. The homogenization temperature of fracture fill inclusions was high, and the paleo-stress value was large; the tectonic movement from the late to present period was mainly a slight transformation and superposition of existing fractures and tectonic systems. Based on the principle of tectonic analysis and theory of geomechanics, we clarified the mechanism of the fractures in the Longmaxi Formation, and established the genetic model of the Longmaxi Formation. The research on the qualitative and quantitative techniques of the fracture-phase study could be effectively used to analyze the causes of the marine shale gas fractures in the Sichuan Basin. The research findings and results provide important references and technical support for further exploration and development of marine shale gas in South China.  相似文献   

湘中基底-盖层W-Au-Sb热液系统的金属分异机制综述          下载免费PDF全文

张勇  马东升  潘家永  伍洪  陈方楠 《地质找矿论丛》2018,33(3):319-334

湘中盆地锑矿床闻名于世,成矿元素在垂直空间上呈现出上锑(泥盆系)、中金锑(震旦系)、下金钨或金锑钨(板溪群),盆地中锑、边缘锑(金/钨)的成矿分布特征。通过系统的成矿地质条件、成矿元素地球化学研究,以及矿物流包裹体地球化学数据分析表明,湘中盆地及其基底的成矿元素分带是成矿流体性质和元素地球化学行为差异等因素相互耦合的结果。湘中地区基底-盖层成矿系统:构造-岩浆岩+盆地-流体作用,基底成矿元素在流体的作用下被萃取迁移到不同部位(基底→盖层不断演化);成矿元素锑的沉淀主要受流体的温度和pH值影响,金的沉淀主要受硫逸度或总硫溶度的控制,钨的沉淀主要受流体的盐度控制,且因物化条件的变化和元素地球化学行为的控制而呈现不同元素组合沉淀成矿。  相似文献   

Larger Foraminiferal Biostratigraphy and Facies Analysis of the Oligocene–Miocene Asmari Formation in the Western Fars Sub-basin, Zagros Mountains, Iran     

Tahereh HABIBI  Telm BOVER-ARNAL 《《地质学报》英文版》2018,92(6):2079-2097

The Oligocene–Miocene carbonate record of the Zagros Mountains, known as the Asmari Formation, constitutes an important hydrocarbon reservoir in southern Iran. This marine carbonate succession, which developed under tropical conditions, is explored in terms of larger foraminiferal biostratigraphy, facies analysis and sequence stratigraphy in a new section at Papoon cropping out in the western Fars sub-basin, in the south-east of the Zagros belt. Facies analysis shows evidence of re-working and transport of skeletal components throughout the depositional system, interpreted here as a carbonate ramp. The foraminifera-based biozones identified include the Globigerina–Turborotalia cerroazulensis–Hantkenina Zone and Nummulites vascus–Nummulites fichteli Zone, both of Rupelian age, the Archaias asmaricus–Archaias hensoni–Miogypsinoides complanatus Zone of Chattian age and the ‘Indeterminate’ Zone of Aquitanian age. The vertical sedimentary evolution of the formation exhibits a progressive shallowing of the facies belts and thus the succession is interpreted as a high-rank low-order regressive systems tract. This long-lasting Rupelian–Aquitanian regressive event is in accordance with accepted global long-term eustatic curves. Accordingly, long-term eustatic trends would have been a factor controlling accommodation during the deposition of the Asmari Formation studied in the western Fars sub-basin.  相似文献   

Metallogeny of the Baiyangping Lead‐Zinc Polymetallic Ore Concentration Area,Northern Lanping Basin of Yunnan Province,China     

WANG Xiaohu  SONG Yucai  ZHANG Hongrui  LIU Yingchao  PAN Xiaofei  GUO Tao 《《地质学报》英文版》2018,92(4):1486-1507

The Lanping Basin in the Nujiang‐Lancangjiang‐Jinshajiang (the Sanjiang) area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment‐hosted Pb‐Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India‐Asia continental collisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the ore‐forming elements in the east ore belt are mainly Pb‐Zn‐Sr‐Ag, while Pb‐Zn‐Ag‐Cu‐Co elements are dominant in the west ore belt. Comparative analysis of the C‐O‐Sr‐S‐Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore‐forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb‐Zn mineralization age of both ore belts was contemporary and formed in the same metallogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.  相似文献   

Sinian-Cambrian Tectonic Framework in the Tarim Basin and its Influences on the Paleogeography of the Early CambrianEI北大核心CSCD     

Yan W.  Wu G.  Zhang Y.  Yang G.  Lou H.  Wang X. 《大地构造与成矿学》2018,(3):455-466

Due to strong remodification and sparse trace remnants, tectonic restoration is critical for the reconstructing of the paleography and basin-prototype in the multiple-cycles superimposed basin, which is also fundamental for the hydrocarbon exploration of the deep marine carbonate in the Tarim Basin. This study presents the tectonic framework of the transition phase from the Sinian to the Cambrian Period and its constrains on the paleography of the Cambrian in the Tarim Basin based on comprehensive analysis of new geochronology data, seismic data and regional tectonic data. The results showed that (1) there is a large regional unconformity between the Cambrian and Precambrian, suggesting a discontinuous deposition from the Sinian to the Cambrian that is contrary to the major view; (2) a broad flattened paleotopography formed before Cambrian Period, which is favorable for the wide epicontinental sea environment and a gentle homoclinal ramp platform development in the early Cambrian, and the residual basement low relief uplifts that influence the microfacies differentiation in the carbonate platform; (3) the Cambrian carbonate platform has been involved much into the marginal orogenic belts, and the proto-platform is probably of 200 km out of the present basin in S-N direction; (4) there is a weak extensional setting in the Cambrian-Early Ordovician rather than a strong rifting setting with a large aulacogen into the platform, in which a inter-platform shallow depression and stable ramp platform developed in the Cambrian; (5) there is not troughs, but rather low relief uplifts developed in the Early Cambrian in the southwestern Tarim Basin, and lack of large uplifts along the carbonate platform margins; (6) it is showed a broad architecture of platform-wide slope-ocean basin from the inner Tarim plate to its margin in the Cambrian Period. Considering the basin prototype, the restoration of the tectono-paleography in the early Cambrian in the Tarim Basin is distinct from those of the previously proposed. We propose that a gentle pattern with “two platforms and one inter-depression” in E-W striking other than multiple small platform constrained in the basin, and further subdivision of the western platform with inner platform low uplift and sag in N-S striking, which is possibly inherited from the basement architecture. On the outer of the united platform, there is probably broad gentle slope for transition to ocean basin. We therefore argue that tectonic restoration is crucial for reconstruction of the paleogeography and basin prototype, especially for basins experienced multiphase of tectonic cycles. © 2018, Science Press. All right reserved.  相似文献   

准噶尔腹部火山岩风化壳储层特征及其影响因素          下载免费PDF全文

李治  秦启荣  李朋波  顿雅航  付晓燕 《地质找矿论丛》2018,33(4):589-596

文章通过大量岩芯、铸体薄片观察和测井资料分析,对准噶尔腹部石西石炭系火山岩风化壳储层进行了详细地研究。研究结果表明,该火山岩风化壳储层的储集空间主要有基质溶孔、气孔或杏仁体溶孔、角砾间溶孔、微裂缝和裂缝等,其中与裂缝连通的各类溶孔占主导地位;在岩石分布上以集块岩、条带状熔岩、角砾熔岩和致密凝灰岩为主,玄武岩、安山岩和流纹岩则相对较少;储层物性主要表现为高孔低渗,只有裂缝具有较高的渗透率,且裂缝以高角度缝和直立缝为主。研究还发现,岩性岩相、裂缝和风化淋滤作用是影响该风化壳储层的主要因素。区内油层主要聚中在构造高部位、靠近断裂带和有利岩相区域;油层分布在离石炭系风化壳顶面25~150 m的范围内。  相似文献